Tcping的常用一些指令的实例(使用baidu.com作为测试对象，在没有指定端口的时候默认为80端口如要测试其他端口则需要在后面加一个“空格“在加”测试端口“待测的域名与ip皆可)： tcping baidu.com tcping baidu.com 443 tcping 18.104.22.168 555 测试4次结束 tcping -t baidu.com 无限测试，当同时按住 CTRL+C时结束测试 #更多用法请查看官方文档
tcping - simulate "ping" over tcp by establishing a connection to network hosts.
Measures the time for your system to [SYN], receive the target's SYN and send [ACK]. Note that the travel time for
the last ACK is not included - only the time it takes to be put on the wire a tthe sending end.
tcping [-tdsvf46] [-i interval] [-n times] [-w interval] [-b n] -r times [--tee filename] [-f] destination [port]
tcping measures the time it takes to perform a TCP 3-way handshake (SYN, SYN/ACK, ACK) between itself and a remote host.
The travel time of the outgoing final ACK is not included, only the (minimal) amount of time it has taken to drop it on
the wire at the near end. This allows the travel time of the (SYN, SYN/ACK) to approximate the travel time of the
ICMP (request, response) equivalent.
-4 Prefer using IPv4
-6 Prefer using IPv6
-t ping continuously until stopped via control-c
send count pings and then stop. Default 4.
Wait interval seconds between pings. Default 1. Decimals permitted.
Wait interval seconds for a response. Default 2. Decimals permitted.
-d include date and time on every output line
-f Force sending at least one byte in addition to making the connection.
Give up after count failed pings.
Enable audible beeps.
'-b 1' will beep "on down". If a host was up, but now its not, beep.
'-b 2' will beep "on up". If a host was down, but now its up, beep.
'-b 3' will beep "on change". If a host was one way, but now its the other, beep.
'-b 4' will beep "always".
-c only show output on a changed state
Every count pings, we will perform a new DNS lookup for the host in case it changed.
-s Exit immediately upon a success.
-v Print version and exit.
-j Calculate jitter. Jitter is defined as the difference between the last response time and the historical average.
Calculate jitter, as with -j but with an optional depth argument specified. If depth is specified tcping will
use the prior depth values to calculate a rolling average.
Duplicate output to the filename specified. Windows can still not be depended upon to have a useful command line
- Don't tease me, *nix guys.
When using --tee, append to rather than overwrite the output file.
Treat the "destination" option as a filename. That file becomes a source of destinations, looped through on a
line by line basis. Some options don't work in this mode and statistics will not be kept.
A DNS name, an IP address, or (in "http" mode) a URL.
Do not specify the protocol ("http://") in "http" mode. Also do not specify server port via ":port" syntax.
For instance: "tcping http://www.elifulkerson.com:8080/index.html" would fail
Use the style: "tcping www.elifulkerson.com/index.html 8080" instead.
A numeric TCP port, 1-65535. If not specified, defaults to 80.
include a header with the command line arguments and timestamp. Header is implied if using --tee.
HTTP MODE OPTIONS
-h Use "http" mode. In http mode we will attempt to GET the specified document and return additional values including
the document's size, http response code, kbit/s.
-u In "http" mode, include the target URL on each output line.
--post Use POST instead of GET in http mode.
--head Use HEAD instead of GET in http mode. --get Shorthand to invoke "http" mode for consistency's sake.
Connect to proxyserver to request the url rather than the server indicated in the url itself.
Specify the numeric TCP port of the proxy server. Defaults to 3128.
Specify a username:password pair which is sent as a 'Proxy-Authorization: Basic' header.
tcping returns 0 if all pings are successful, 1 if zero pings are successful and 2 for mixed outcome.
Please report bugs and feature requests to the author via contact information on http://www.elifulkerson.com
tcping is available at http://www.elifulkerson.com/projects/tcping.php
版权声明：本文为原创文章，版权归 GAted0 所有。